Village Street Lighting with Solar Cells and Counseling on Electricity & EBT for the Cikembang Caringin Community, Sukabumi Regency
DOI:
https://doi.org/10.59247/jppmi.v3i10.228Keywords:
Cikembang, Electricity Education, EBT, Sukabumi, NusaputraAbstract
Street lighting is an important aspect in the lives of rural communities. However, the Cikembang Caringin area in Sukabumi Regency still faces challenges in providing efficient and sustainable street lighting. To overcome this problem, this study was carried out with the aim of implementing solar cells as an alternative source of street lighting and providing education about electricity to the local community. The results of this study show that the implementation of solar cells as a source of street lighting in Cikembang Caringin provides positive results. Street lighting produced from a solar cell system is able to provide sufficient light for the community at night, thereby providing a sense of security and comfort for local residents.The education about electricity, namely the dangers of short circuits and also about Renewable Energy provided by Pak Anang and Pak Tyo, had a positive impact in increasing public awareness of the wise and sustainable use of energy. It is hoped that the findings from this research can be an inspiration for the development of renewable energy-based street lighting in other rural areas.
References
G. Che et al., “Boosting the efficiency and stability of CsPbBr3 perovskite solar cells through modified multi-step spin-coating method,” J. Alloys Compd., vol. 969, p. 172423, Dec. 2023.
S. Y. Abate et al., “Surface Capping Layer Prepared from the Bulky Tetradodecylammonium Bromide as an Efficient Perovskite Passivation Layer for High-Performance Perovskite Solar Cells,” ACS Appl. Mater. Interfaces, vol. 14, no. 51, pp. 56900–56909, Dec. 2022.
R. Shen, J. Xu, X. Yao, Z. Guo, W. Yang, and X. Ma, “Exciton–Phonon Coupling and Low Energy Emission in 2D and Quasi-2D BA 2 MA n –1 Pb n I 3 n +1 Thin Films with Improved Phase Purity,” J. Phys. Chem. Lett., vol. 12, no. 51, pp. 12336–12344, Dec. 2021.
S. Kumar, I. Singh, N. Hsan, B. S. Swain, and J. Koh, “Synthesis of chitosan-based perylene dye material for photovoltaic solar-cell application,” Int. J. Biol. Macromol., vol. 253, p. 126964, Dec. 2023.
NURSYAFIRA ADZIRA HALMI and MENG GUAN TAY, “Synthesis of Conjugated bis-Schiff Base and Their Complexes as Dye-Sensitizer for Dye Sensitized Solar Cell (DSSC) Application,” Borneo J. Resour. Sci. Technol., vol. 12, no. 2, pp. 101–118, Dec. 2022.
Y. Miyake and A. Saeki, “Machine Learning-Assisted Development of Organic Solar Cell Materials: Issues, Analyses, and Outlooks,” J. Phys. Chem. Lett., vol. 12, no. 51, pp. 12391–12401, Dec. 2021.
Y. Lei et al., “Synergistic effect from an additive induces enhanced bending resistance and self-healing properties for efficient flexible perovskite solar cells,” J. Alloys Compd., vol. 969, p. 172427, Dec. 2023.
L. Van Cuong et al., “Effect of reducing agents on co-precipitation synthesis of titanium dioxide/reduced graphene oxide composite materials for upgrading the performance of dye-sensitized solar cells,” Chem. Eng. Sci., vol. 264, p. 118145, Dec. 2022.
H. Guo et al., “High-Efficiency Sb 2 Se 3 Solar Cells Modified by Potassium Hydroxide,” J. Phys. Chem. Lett., vol. 12, no. 51, pp. 12352–12359, Dec. 2021.
K. Gunasekaran, S. Athithya, M. Navaneethan, S. Harish, and J. Archana, “Mesoporous Ti-substituted NiO nanosheets as an efficient electrocatalyst for triiodide reduction in dye-sensitized solar cells,” J. Alloys Compd., vol. 969, p. 172155, Dec. 2023.
H. Wang et al., “Suppression of PbI2 decomposition with Lewis base semicarbazide hydrochloride for photostable and efficient perovskite solar cells,” J. Power Sources, vol. 552, p. 232213, Dec. 2022.
S. Toda, E. W.-G. Diau, and S. Shigeto, “Mapping of Grain Orientation In Situ of 2D Perovskite Thin Films with Low-Frequency Polarized Raman Microspectroscopy,” J. Phys. Chem. C, vol. 125, no. 51, pp. 27996–28003, Dec. 2021.
G. Lewinska, J. Kanak, K. S. Danel, J. Sanetra, and K. W. Marszalek, “Effect of benzene-based dyes on optothermal properties of active layers for ternary organic solar cells,” Appl. Surf. Sci., vol. 641, p. 158535, Dec. 2023.
W. Li et al., “In 2 Se 3 , In 2 Te 3 , and In 2 (Se,Te) 3 Alloys as Photovoltaic Materials,” J. Phys. Chem. Lett., vol. 13, no. 51, pp. 12026–12031, Dec. 2022.
W. Wu, H. Xu, G. Liu, H. Zheng, and X. Pan, “Introduction of 4-hydroxybenzaldehyde as interface modifier with multidimensional defects passivation effect for high-performance perovskite solar cells,” Appl. Surf. Sci., vol. 570, p. 151259, Dec. 2021.
Z. Luo, X. Zhang, C. Wang, W. Zhang, and W. Zheng, “How do carbon dots with amine terminals help perovskite solar cells perform better?,” J. Alloys Compd., vol. 969, p. 172340, Dec. 2023.
V. Held et al., “Evolution of Structure and Optoelectronic Properties During Halide Perovskite Vapor Deposition,” J. Phys. Chem. Lett., vol. 13, no. 51, pp. 11905–11912, Dec. 2022.
Y.-Q. Zhou, J.-B. Liu, and B.-X. Liu, “Electronic structure and stability of the (0 0 1) surface of halide double perovskite Cs2AgBiBr6,” Appl. Surf. Sci., vol. 570, p. 151223, Dec. 2021.
Y. Pang et al., “Nose-to-brain translocation and nervous system injury in response to indium tin oxide nanoparticles of long-term low-dose exposures,” Sci. Total Environ., vol. 905, p. 167314, Dec. 2023.
L.-H. Wang et al., “Reducing Voltage Losses of Organic Solar Cells against Energetics Modifications by Thermal Stress,” J. Phys. Chem. Lett., vol. 13, no. 51, pp. 11974–11981, Dec. 2022.
T. J. Macdonald et al., “Phosphorene Nanoribbon-Augmented Optoelectronics for Enhanced Hole Extraction,” J. Am. Chem. Soc., vol. 143, no. 51, pp. 21549–21559, Dec. 2021.
X. Hu, Y. Pan, J. Wang, Z. Liu, and W. Chen, “Reducing energy disorder by stabilizing octahedral lattice with thiocyanate for efficient and stable Sn-Pb mixed perovskite solar cells,” Nano Energy, vol. 118, p. 108937, Dec. 2023.
R. Chen et al., “Conformal Imidazolium 1D Perovskite Capping Layer Stabilized 3D Perovskite Films for Efficient Solar Modules,” Adv. Sci., vol. 9, no. 36, Dec. 2022.
C. W. AHN, J. S. CHOI, M. SHEERAZ, H. M. KIM, I. W. KIM, and T. H. KIM*, “Emerging Hetero-anionic Materials: Oxychalcogenide Perovskites,” New Phys. Sae Mulli, vol. 71, no. 12, pp. 991–1003, Dec. 2021.
Y. Wang et al., “Formamidine formate as the multifunctional modulator at buried interface for efficient FAPbI3 perovskite solar cells,” Nano Energy, vol. 118, p. 108981, Dec. 2023.
R. He et al., “Pure 2D Perovskite Formation by Interfacial Engineering Yields a High Open‐Circuit Voltage beyond 1.28 V for 1.77‐eV Wide‐Bandgap Perovskite Solar Cells,” Adv. Sci., vol. 9, no. 36, Dec. 2022.
A. Penezko, M. Kauk-Kuusik, O. Volobujeva, and M. Grossberg, “Properties of Cu-Sb-Se thin films deposited by magnetron co-sputtering for solar cell applications,” Thin Solid Films, vol. 740, p. 139004, Dec. 2021.
L. Boulkaddat et al., “Experimental and theoretical study of electrodeposited CuInS2 thin films for solar cell applications,” Phys. B Condens. Matter, vol. 671, p. 415374, Dec. 2023.
H. Roh, H. Choi, J.-S. Kim, H. Shin, T. Park, and K. Yong, “Low power consumed PV-electrolysis with CoFeP nanowires for hydrazine-assisted hydrogen production,” Appl. Surf. Sci., vol. 606, p. 154951, Dec. 2022.
Q. Han et al., “High-performance carbon-based CsPbI2Br perovskite solar cells via small molecule modification,” J. Power Sources, vol. 516, p. 230676, Dec. 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Marina Artiyasa, Anggy Pradifth , Muchtar Setyo Ali Yudono , Aryo de Wibowo , Isep Tedi
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
