Strategy to Increase Knowledge and Awareness of Spring Management in Drawati Village through the SMAJA Program
DOI:
https://doi.org/10.59247/jppmi.v1i7.33Keywords:
Empowerment, Kaizen, Water springs, Quadruple helixAbstract
The Campaka spring is one of the water sources used by the community in Drawati for consumption and agriculture. Since 2018, it has several problems: garbage which hinders irrigation and water quality decreases, the lack of awareness and knowledge of the local community and managers. Based on this background, the SMAJA program was initiated and implemented with the objectives of (1) increasing public awareness and knowledge through imah cai pancarama adopted from the house model; (2) Strategies and recommendations to sustainability of the SMAJA program. The method used is the kaizen method which consists of seiri, seiton, seiso, seiketsu and shitsuke. The collaboration of three techniques, namely counseling, training and mentoring. The number of target involved was 12 people but some activities could be attended by more than 40 people. The results are an increase in test scores of knowledge and concern. The value of knowledge from the original 2.00 to 3.70 on a scale of 1-5 and the value of concern for interests from 4.58 to 4.90 which was also measured from action from 2.50 to 3.80. The sustainability is formed in a quadruple helix.
References
G. M. Ashley, “Spring settings,” Encycl. Earth Sci. Ser., pp. 896–901, 2017, doi: 10.1007/978-1-4020-4409-0_162/COVER.
N. Kresic, “Sustainability and management of springs,” Groundw. Hydrol. Springs Eng. Theory, Manag. Sustain., pp. 1–29, Jan. 2010, doi: 10.1016/B978-1-85617-502-9.00001-3.
B. Boumaza, T. V. Chekushina, K. A. Vorobyev, and L. E. Schesnyak, “The heavy metal pollution in groundwater, surface and spring water in phosphorite mining area of Tebessa (Algeria),” Environ. Nanotechnology, Monit. Manag., vol. 16, p. 100591, Dec. 2021, doi: 10.1016/j.enmm.2021.100591.
K. Khadka and M. Lal, “Hydrogeochemical assessment of spring water resources around Melamchi , Central Nepal,” Water Pract. Technol., vol. 15, no. 3, pp. 748–758, Jan. 2020, doi: 10.2166/wpt.2020.066.
S. Ye, J. Han, and T. Liu, “Determination of optimum irrigation strategies and effect of drip irrigation system on growth and water use efficiency of pear jujube in Loess Hilly region of northern Shaanxi,” PLoS One, vol. 14, no. 8, Jan. 2019, doi: 10.1371/journal.pone.0221925.
S. Ramdlani and A. Rufaida, “Design Factors of Ngembul Spring Water Tourism Development for Conserving the Green Belt of Tajinan, Malang,” pp. 156–162, Jul. 2020, doi: 10.2991/AER.K.200729.025.
G. Irianto, “Hilangnya Sumber Mata Air dan Dampaknya terhadap ‘Desertification,’” Sinar Tani, 2004.
Sudarmadji, D. Darmanto, M. Widyastuti, and S. Lestari, “Pengelolaan Mata Air Untuk Penyediaan Air Rumahtangga Berkelanjutan di Lereng Selatan Gunungapi Merapi,” J. Mns. dan Lingkung., vol. 23, no. 1, pp. 102–110, Jan. 2016, doi: 10.22146/jml.18779.
Profil Desa Drawati, “Buku Profil Desa Drawati 2020.” 2020, doi:
Dinas Pertanian Kabupaten Bandung, “Pemkab Bandung dan Kelompok Tani Campaka 2 Bangun Embung Air,” distan.bandungkab.go.id, Bandun, pp. 12–26, Nov-2018.
J. C. Oliveira, “Sustainable Processing: Continuous Process Improvement and Optimization,” Encycl. Dairy Sci. Third Ed., vol. 4, pp. 812–820, Sep. 2020, doi: 10.1016/B978-0-12-818766-1.00267-1.
Y. Umeda et al., “Exercise of digital kaizen activities based on ‘digital triplet’ concept,” Procedia Manuf., vol. 45, pp. 325–330, Jan. 2020, doi: 10.1016/J.PROMFG.2020.04.025
D. R. Kiran, “Kaizen and continuous improvement,” in Work Organization and Methods Engineering for Productivity, Elsevier, pp. 155–161, Jan. 2020, doi: 10.1016/B978-0-12-819956-5.00011-X.
J. L. G. Alcaraz, M. O. Vento, and A. A. M. Macias, Kaizen Planning , Implementing and Controlling, 1st ed. Mexico: Spinger, Jan. 2017.
J. G. Brawner, G. A. Harris, and G. A. Davis, “Will the real relationship between lean and safety/ergonomics please stand up?,” Appl. Ergon., vol. 100, p. 103673, Dec. 2021, doi: 10.1016/J.APERGO.2021.103673.
M. Mohan Prasad, J. M. Dhiyaneswari, J. Ridzwanul Jamaan, S. Mythreyan, and S. M. Sutharsan, “A framework for lean manufacturing implementation in Indian textile industry,” Mater. Today Proc., vol. 33, pp. 2986–2995, Dec. 2020, doi: 10.1016/j.matpr.2020.02.979.
M. G. Maarof and F. Mahmud, “A Review of Contributing Factors and Challenges in Implementing Kaizen in Small and Medium Enterprises,” Procedia Econ. Financ., vol. 35, pp. 522–531, Mar. 2016, doi: 10.1016/S2212-5671(16)00065-4.
L. Hartmann and J. Metternich, “Waste in value streams caused by information flow: An analysis of information flow barriers and possible solutions,” Procedia Manuf., vol. 52, pp. 121–126, Jan. 2020, doi: 10.1016/J.PROMFG.2020.11.022.
A. D. Ioana, E. D. Maria, and V. Cristina, “Case Study Regarding the Implementation of One-Piece Flow Line in Automotive Company,” Procedia Manuf., vol. 46, pp. 244–248, May. 2020, doi: 10.1016/j.promfg.2020.03.036.
M. K. Lim, M. Lai, C. Wang, and S. Y. Lee, “Circular economy to ensure production operational sustainability: A green-lean approach,” Sustain. Prod. Consum., vol. 30, pp. 130–144, Dec. 2021, doi: 10.1016/j.spc.2021.12.001.
E. N. Shaqour, “The impact of adopting lean construction in Egypt: Level of knowledge, application, and benefits,” Ain Shams Eng. J., vol. 13, no. 2, p. 101551, Jul. 2021, doi: 10.1016/j.asej.2021.07.005.
L. Jum’a, D. Zimon, M. Ikram, and P. Madzík, “Towards a sustainability paradigm; the nexus between lean green practices, sustainability-oriented innovation and Triple Bottom Line,” Int. J. Prod. Econ., vol. 245, p. 108393, Dec. 2021, doi: 10.1016/j.ijpe.2021.108393.
F. Citra Febriyanto, A. Kusumaningsih, L. Ira Sahara, B. Saga, and U. Pamulang, “Pengenalan Metode Kaizen dalam Meningkatkan Efisiensi dan Produktivitas di PKBM/Pusat Kegiatan Belajar Masyarakat Kak Seto,” J. Abdidas, vol. 1, no. 2, pp. 48–56, Jun. 2020, doi: 10.31004/ABDIDAS.V1I2.19.
J. Horovitz and A. Ohlsson-corboz, A dream with a Deadline: Turning Strategy into Action. Harlow: FT Prentice Hall, 2007.
D. Fadillah, “Integrasi Pendidikan Ksatria dalam Pendidikan Karakter,” Yogyakarta, 2013.
M. Feinman, A. T. W. Hsu, S. Taylor, and L. Torbeck, “Cutting the fat: Utilizing LEAN methodology to improve rounding efficiency of surgical residents,” Am. J. Surg., vol. 223, no. 6, pp. 1100–1104, Jun. 2022, doi: 10.1016/J.AMJSURG.2021.12.005.
A. Anosike, K. Alafropatis, J. A. Garza-Reyes, A. Kumar, S. Luthra, and L. Rocha-Lona, “Lean manufacturing and internet of things – A synergetic or antagonist relationship?,” Comput. Ind., vol. 129, p. 103464, Aug. 2021, doi: 10.1016/j.compind.2021.103464.
M. Balaji, S. N. Dinesh, S. Raja, R. Subbiah, and P. Manoj Kumar, “Lead time reduction and process enhancement for a low volume product,” Mater. Today Proc., Dec. 2021, doi: 10.1016/j.matpr.2021.12.240.
S. R. Kumar, V. N. Nathan, S. I. M. Ashique, V. Rajkumar, and P. A. Karthick, “Productivity enhancement and cycle time reduction in toyota production system through jishuken activity – Case study,” Mater. Today Proc., vol. 37, no. Part 2, pp. 964–966, Jan. 2021, doi: 10.1016/J.MATPR.2020.06.181.
P. Jadhav and N. Ekbote, “Implementation of lean techniques in the packaging machine to optimize the cycle time of the machine,” Mater. Today Proc., vol. 46, pp. 10275–10281, Jan. 2021, doi: 10.1016/J.MATPR.2020.12.162.
I. Karlsdóttir, D. Cook, and I. Minelgaite, “Efficiency management in catch handling onboard small boats – Standardisation of processes in Icelandic fisheries,” Sustain. Futur., vol. 3, p. 100060, Jan. 2021, doi: 10.1016/J.SFTR.2021.100060.
S. Vijay and M. Gomathi Prabha, “Work standardization and line balancing in a windmill gearbox manufacturing cell: A case study,” Mater. Today Proc., vol. 46, pp. 9721–9729, Jan. 2021, doi: 10.1016/J.MATPR.2020.08.584.
M. Kurdve and M. Bellgran, “Green lean operationalisation of the circular economy concept on production shop floor level,” J. Clean. Prod., vol. 278, p. 123223, Jan. 2021, doi: 10.1016/j.jclepro.2020.123223.
A. Palange and P. Dhatrak, “Lean manufacturing a vital tool to enhance productivity in manufacturing,” Mater. Today Proc., vol. 46, pp. 729–736, Jan. 2021, doi: 10.1016/j.matpr.2020.12.193.
F. A. Sultan, S. Routroy, and M. Thakur, “A simulation-based performance investigation of downstream operations in the Indian Surimi Supply Chain using environmental value stream mapping,” J. Clean. Prod., vol. 286, p. 125389, Mar. 2021, doi: 10.1016/j.jclepro.2020.125389.
B. D. Lee, D. I. Carey, and A. J. Jones, Water in Kentucky: Natural History, Communities and Conservation. Lexington: The University Press of Kentucky, Jan. 2017, doi: 10.5810/kentucky/9780813168685.001.0001.
N. Hasche, L. Höglund, and G. Linton, “Quadruple helix as a network of relationships : creating value within a Swedish regional innovation system,” J. Small Bus. Entrep., vol. 32, no. 6, pp. 523–544, Jan. 2020, doi: 10.1080/08276331.2019.1643134.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Muhamad Zidan Rahmat, Andani Jamilah Mardotilah , Irgi Fadilah Rahman , Rifaldi Cahyanto , Shafa Isnanda Zoelianafasa , Lindawati Kartika
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
