Design and Implementation of a Distributed Parameter Electromechanical System Control System for Automation and Optimization

Authors

  • A. P. Korneev Universiti Sains Malaysia, Penang, Malaysia
  • Yitong Niu Belarusian-Russian University, Mogilev, Belarus
  • Muneer S.G. Mansoor University of Information Technology and Communications (UOITC), Iraq
  • Zinah S. Jabbar College of Information Technology, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq
  • Jamal Fadhil Tawfeq Medical Technical College, Al
  • Ahmed Dheyaa Radhi University of Al-Ameed, Karbala PO Box 198, Iraq

Keywords:

System with distributed, parameters, Resonance, Observing device, Data recovery, Hyperbolic trigonometric, function

Abstract

A distributed parameter electromechanical system control system is a type of control system that is used to control the operation of electromechanical systems. This type of system is designed to provide a high degree of accuracy and reliability in controlling the operation of an electromechanical system. It can be used to control a wide variety of systems, including motors, pumps, valves, and other types of machinery. Considering a system with distributed parameters of mechanical parts, this paper designs a method for implementing a semi-closed control system of electromechanical systems with distributed parameters of mechanical parts using an observation device. The observation device is in feedback and restores the output velocity without directly measuring it. For the observation device, a general view of the transfer function is determined, and its graphical representation is given. The LAFC of the mechanical part of the system with distributed parameters is presented, where the observation device with and without the experimental bench used for the simplest case is compared. Finally, a method of implementing a semi-closed control system for electromechanical systems with distributed parameters of mechanical parts using the observation device is presented.

Author Biographies

A. P. Korneev, Universiti Sains Malaysia, Penang, Malaysia

School of Industrial Technology, Universiti Sains Malaysia, Penang, Malaysia

Yitong Niu , Belarusian-Russian University, Mogilev, Belarus

Faculty of Electrical Engineering, Belarusian-Russian University, Mogilev, Belarus

Muneer S.G. Mansoor , University of Information Technology and Communications (UOITC), Iraq

College of Engineering, University of Information Technology and Communications (UOITC), Iraq

Zinah S. Jabbar , College of Information Technology, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq

Department of Communication Technology Engineering, College of Information Technology, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq

Jamal Fadhil Tawfeq , Medical Technical College, Al

Department of Medical Instrumentation Technical Engineering, Medical Technical College, Al

Ahmed Dheyaa Radhi, University of Al-Ameed, Karbala PO Box 198, Iraq

College of Pharmacy, University of Al-Ameed, Karbala PO Box 198, Iraq

References

S. Zhang et al., “A Global Optimization Algorithm for Intelligent Electromechanical Control System with Improved Filling Function,” Sci. Program., vol. 2022, pp. 1–10, Mar. 2022.

S. Chen, Y. Zhang, X. Hong, and J. Li, “Technologies and applications of silicon-based micro-optical electromechanical systems: A brief review,” J. Semicond., vol. 43, no. 8, p. 081301, Aug. 2022.

A. D. Tulegulov, D. S. Yergaliyev, N. A. Bazhaev, T. B. Keribayeva, and K. M. Akishev, “METHODS FOR IMPROVING PROCESS AUTOMATION IN THE MINING INDUSTRY,” Ser. Geol. Tech. Sci., vol. 1, no. 451, pp. 115–125, Feb. 2022.

Q. Wu, Y. Sun, B. Pan, and D. GU, “Design and experiments of ultra-precision aerostatic turning machine tool,” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., vol. 236, no. 23, pp. 11150–11159, Dec. 2022.

E. Daş, “Combined design of robust controller and disturbance observer in a fixed-order H ∞ control framework,” Mechatronics, vol. 88, p. 102912, Dec. 2022.

Z. Li, X. Li, Y. Wang, and P. Yu, “Design and application of online water quality monitoring system based on Internet of things,” in Proceedings of the 7th International Conference on Cyber Security and Information Engineering, 2022, pp. 713–718.

M. Xin et al., “Ballpoint-Pen Like Probes for Multipoint Dynamic Pulse Diagnosis System,” IEEE Sens. J., vol. 22, no. 12, pp. 12253–12259, Jun. 2022.

S. Wang, X. Xin, J. Ren, and G. Guo, “Digital Control System for Stepping Motor Driver Chip,” J. Phys. Conf. Ser., vol. 2221, no. 1, p. 012003, May 2022.

J. Zhang, “Modeling and Simulation of the NC Feed System based on MATLAB / Simulink,” J. Phys. Conf. Ser., vol. 2229, no. 1, p. 012018, Mar. 2022.

J. G. Kokunko, D. V. Krasnov, and E. V. Potehina, “Dynamic Smoothing of the Program Motions for Single-Channel Electromechanical Control Plant,” in 2022 15th International Conference Management of large-scale system development (MLSD), 2022, pp. 1–6.

E. Daş and S. Çağlar Başlamışlı, “Data-driven fixed-order H ∞ controller synthesis in frequency domain: Closed-loop system approach,” Trans. Inst. Meas. Control, vol. 43, no. 5, pp. 1059–1067, Mar. 2021.

E. Daş and S. Çağlar Başlamışlı, “Two degree of freedom robust data-driven fixed-order controller synthesis using convex optimization,” ISA Trans., vol. 114, pp. 291–305, Aug. 2021.

J. Huang, L. Luo, F. Zhang, H. Zhang, and X. Zhao, “Design of and Research of Vertical Deformation Measuring Instrument based on Synthetic Material,” IOP Conf. Ser. Earth Environ. Sci., vol. 526, no. 1, p. 012071, Jun. 2020.

D. Kum and H. S. Chwa, “Adaptive Brake System Software Platform for Self-Driving Cars,” J. Inst. Control. Robot. Syst., vol. 27, no. 3, pp. 197–201, Mar. 2021.

X. Cheng et al., “Optimization of operating parameters of seeding device in plot drill with seeding control system,” Int. J. Agric. Biol. Eng., vol. 14, no. 3, pp. 72–80, 2021.

Y. Paranchuk, V. Moroz, V. Tsyapa, and M. Khai, “Simulation of modes of by-phase electromechanical fuzzy control system of arc furnace arc lengths,” in 2021 IEEE 16th International Conference on Computer Sciences and Information Technologies (CSIT), 2021, pp. 186–189.

V. P. Kazantsev, S. V. Bochkarev, O. A. Bilous, and A. V. Mogilnikov, “Model Predictive Control of Positional Tracking Electromechanical Systems,” Russ. Electr. Eng., vol. 91, no. 11, pp. 653–658, Nov. 2020.

C. Zhang, “Research on Typical System Platform of Mechanical and Electrical Equipment Based on Embedded Technology,” J. Phys. Conf. Ser., vol. 1650, no. 2, p. 022013, Oct. 2020.

Z. Niu, S. Wang, J. Wang, and C. Wen, “A Novel Method of K-band Electromechanical Control Waveguide Switch Design,” in 2020 International Conference on Microwave and Millimeter Wave Technology (ICMMT), 2020, pp. 1–3.

D. V. Krasnov and A. V. Utkin, “Robust State Observers for Electromechanical Control Plants with Sensorless Manipulators,” IFAC-PapersOnLine, vol. 54, no. 13, pp. 419–424, 2021.

Y. Zhou et al., “Controlling Excitons in an Atomically Thin Membrane with a Mirror,” Phys. Rev. Lett., vol. 124, no. 2, p. 027401, Jan. 2020.

J. An, Y. Jiang, B. Shi, D. Wu, and W. Wu, “Low-Cost Battery-Powered and User-Friendly Real-Time Quantitative PCR System for the Detection of Multigene,” Micromachines, vol. 11, no. 4, p. 435, Apr. 2020.

K. Ni, Y. Hu, C. Gan, C. Gong, and H. Wen, “Synthetic Internal Voltage Phase–Amplitude Dynamics Investigation for Electric Drivetrain Small-Signal Model in Electromechanical Control Timescale for a Wound Rotor Induction Machine-Based Shipboard Power System,” IEEE Trans. Transp. Electrif., vol. 6, no. 2, pp. 844–855, Jun. 2020.

Y. Xi and Q. Xing, “Automatic Electromechanical Control System Based on PLC Technology,” J. Phys. Conf. Ser., vol. 2143, no. 1, p. 012037, Dec. 2021.

V. A. Kostyukov, M. Y. Medvedev, N. K. Poluyanovich, and M. N. Dubygo, “Features of Electromechanical Control of a Complex Power Plant with a Vortex-Type Wind-Conversion Device,” 2020, pp. 159–166.

C. Huang, “Research on Virtual Platform of Electrical Control of Mechatronics Equipment Based on VRML,” J. Phys. Conf. Ser., vol. 2023, no. 1, p. 012046, Sep. 2021.

G. Saccomandi, E. Speranzini, and G. Zurlo, “Piezoelectric Machines: Achieving Non-Standard Actuation and Sensing Properties in Poled Ceramics,” Q. J. Mech. Appl. Math., vol. 74, no. 2, pp. 159–172, May 2021.

C. He, Y. Luo, and G. Liu, “Teaching Cases Analysis of Integration of Electromechanical Control of Linkage Mechanism,” J. Phys. Conf. Ser., vol. 1735, no. 1, p. 012013, Jan. 2021.

A. Malyar and I. Holovach, “Simulation of Sucker-Rod Oil Pumping Unit Operation for Marginal Wells,” in 2021 IEEE International Conference on Modern Electrical and Energy Systems (MEES), 2021, pp. 1–4.

R. Niu, H. Yao, X. Tong, and A. Algabri, “ANALYSIS OF ELECTRIC CONTROL SYSTEM OF RICE TRANSPLANTER UNDER WSN (WIRELESS SENSOR NETWORK),” INMATEH Agric. Eng., vol. 1, no. 10, pp. 345–354, Apr. 2021.

Downloads

Published

2023-01-03

How to Cite

A. P. Korneev, Yitong Niu, Muneer S.G. Mansoor, Zinah S. Jabbar, Jamal Fadhil Tawfeq, & Ahmed Dheyaa Radhi. (2023). Design and Implementation of a Distributed Parameter Electromechanical System Control System for Automation and Optimization. Jurnal Pengabdian Dan Pemberdayaan Masyarakat Indonesia, 3(1), 28–34. Retrieved from https://jppmi.ptti.web.id/index.php/jppmi/article/view/141

Issue

Vol. 3 No. 1 (2023)

Section

Articles

License

Copyright (c) 2023 A. P. Korneev, Yitong Niu , Muneer S.G. Mansoor , Zinah S. Jabbar , Jamal Fadhil Tawfeq , Ahmed Dheyaa Radhi

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.