Control method of LED matrix bulletin board that can be connected to Bluetooth mobile phone
DOI:
https://doi.org/10.59247/jppmi.v3i7.188Keywords:
LED Bulletin Board, Wireless Control, Bluetooth Connectivity, ArduinoAbstract
Traditional bulletin boards use paper as a way of presentation, and with the promotion of sustainability, it is clear that paper that can only be used once is very wasteful. The use of LEDs to replace traditional bulletin boards is not only more efficient and functional but also beneficial to the environment. This paper focuses on an operating system for LED bulletin boards that interacts with an Android application via Bluetooth, where the user can send the content to be displayed to a matrix that then displays and moves the message. The central processing unit used in the system is an Atmega328 microcontroller dedicated to the Arduino UNO board, shifts for measuring, walking, and scrolling the screen to move the text from right to left, and a Bluetooth module for enabling wireless network functionality and receiving features. It is hoped that the system will benefit LED bulletin boards.
References
R. Salvati, V. Palazzi, L. Roselli, F. Alimenti, and P. Mezzanotte, “Emerging Backscattering Technologies for Wireless Sensing in Harsh Environments: Unlocking the Potential of RFID-based Backscattering for Reliable Wireless Sensing in Challenging Environments,” IEEE Microw. Mag., vol. 24, no. 10, pp. 14–23, Oct. 2023.
W. Meng, Y. Yang, R. Zhang, Z. Wu, and X. Xiao, “Triboelectric-electromagnetic hybrid generator based self-powered flexible wireless sensing for food monitoring,” Chem. Eng. J., vol. 473, p. 145465, Oct. 2023.
K. S. Moon and S. Q. Lee, “A Wearable Multimodal Wireless Sensing System for Respiratory Monitoring and Analysis,” Sensors, vol. 23, no. 15, p. 6790, Jul. 2023.
X. Shao and R. Zhang, “Enhancing wireless sensing via a target-mounted intelligent reflecting surface,” Natl. Sci. Rev., vol. 10, no. 8, pp. 103–107, Jun. 2023.
H. Du et al., “Semantic Communications for Wireless Sensing: RIS-Aided Encoding and Self-Supervised Decoding,” IEEE J. Sel. Areas Commun., vol. 41, no. 8, pp. 2547–2562, Aug. 2023.
L. Wang et al., “Wearable bending wireless sensing with autonomous wake-up by piezoelectric and triboelectric hybrid nanogenerator,” Nano Energy, vol. 112, p. 108504, Jul. 2023.
C. Sun et al., “Flexible, ultra-wideband acoustic device for ultrasound energy harvesting and passive wireless sensing,” Nano Energy, vol. 112, p. 108430, Jul. 2023.
M. Wang, D. Luo, M. Liu, R. Zhang, Z. Wu, and X. Xiao, “Flexible wearable optical wireless sensing system for fruit monitoring,” J. Sci. Adv. Mater. Devices, vol. 8, no. 2, p. 100555, Jun. 2023.
S. F. Husain, E. Tutumluer, K. A. Mechitov, I. I. A. Qamhia, B. Spencer, and J. Riley Edwards, “Towards a wireless sensing infrastructure for smart mobility,” Transp. Geotech., vol. 40, p. 100985, May 2023.
D.-Y. Chen, L. Dong, and Q.-A. Huang, “PT-Symmetric LC Passive Wireless Sensing,” Sensors, vol. 23, no. 11, p. 5191, May 2023.
S. N. Masabi, H. Fu, and S. Theodossiades, “A bistable rotary-translational energy harvester from ultra-low-frequency motions for self-powered wireless sensing,” J. Phys. D. Appl. Phys., vol. 56, no. 2, p. 024001, Jan. 2023.
L. Li, S. Li, H. Peng, and J. Bi, “An efficient secure data transmission and node authentication scheme for wireless sensing networks,” J. Syst. Archit., vol. 133, p. 102760, Dec. 2022.
U. S. Toro, B. M. ElHalawany, A. B. Wong, L. Wang, and K. Wu, “Backscatter communication-based wireless sensing (BBWS): Performance enhancement and future applications,” J. Netw. Comput. Appl., vol. 208, p. 103518, Dec. 2022.
X. Xiao, Y. Yang, and Z. Wu, “Biomechanical energy harvested wireless sensing for food storage,” Biosens. Bioelectron. X, vol. 12, p. 100267, Dec. 2022.
X. Ding, E. Shen, Y. Zhu, and J. M. Moran-Mirabal, “Stretchable thin film inductors for wireless sensing in wearable electronic devices,” Flex. Print. Electron., vol. 7, no. 3, p. 035017, Sep. 2022.
M. A. Márquez-Vera, M. Martínez-Quezada, R. Calderón-Suárez, A. Rodríguez, and R. M. Ortega-Mendoza, “Microcontrollers programming for control and automation in undergraduate biotechnology engineering education,” Digit. Chem. Eng., vol. 9, p. 100122, Dec. 2023.
S. Chen et al., “Quantitative and Real‐Time Evaluation of Human Respiration Signals with a Shape‐Conformal Wireless Sensing System,” Adv. Sci., vol. 9, no. 32, Nov. 2022.
Z. Yang, H. Li, S. Zhang, X. Lai, and X. Zeng, “Superhydrophobic MXene@carboxylated carbon nanotubes/carboxymethyl chitosan aerogel for piezoresistive pressure sensor,” Chem. Eng. J., vol. 425, p. 130462, Dec. 2021.
Y.-C. Wu, Z.-D. Shao, and H.-K. Kao, “Wearable Device for Residential Elbow Joint Rehabilitation with Voice Prompts and Tracking Feedback APP,” Appl. Sci., vol. 11, no. 21, p. 10225, Nov. 2021.
Y. Yang, B. Mu, M. Wang, M. A. Nikitina, U. Zafari, and X. Xiao, “Triboelectric nanogenerator–based wireless sensing for food precise positioning,” Mater. Today Sustain., vol. 19, p. 100220, Nov. 2022.
S. Takaloo and M. Moghimi Zand, “Design and theoretical error analysis of wireless electrochemical reader to be integrated in smart mask for breath monitoring,” Measurement, vol. 220, p. 113338, Oct. 2023.
T. H. Bui, B. Thangavel, M. Sharipov, K. Chen, and J. H. Shin, “Smartphone-Based Portable Bio-Chemical Sensors: Exploring Recent Advancements,” Chemosensors, vol. 11, no. 9, p. 468, Aug. 2023.
B. Ahn and H.-Y. Jeong, “Implement of an automated unmanned recording system for tracking objects on mobile phones by image processing method,” Multimed. Tools Appl., vol. 80, no. 26–27, pp. 34065–34082, Nov. 2021.
C. Wang, L. Tang, M. Zhou, Y. Ding, X. Zhuang, and J. Wu, “Indoor Human Fall Detection Algorithm Based on Wireless Sensing,” Tsinghua Sci. Technol., vol. 27, no. 6, pp. 1002–1015, Dec. 2022.
F. Yang et al., “Internet-of-Things-Enabled Data Fusion Method for Sleep Healthcare Applications,” IEEE Internet Things J., vol. 8, no. 21, pp. 15892–15905, Nov. 2021.
A. Gani S. F. et al., “Electrical Appliance Switching Controller by Brain Wave Spectrum Evaluation Using a Wireless EEG Headset,” Int. J. Emerg. Technol. Adv. Eng., vol. 11, no. 10, pp. 109–119, Oct. 2021.
M. Ibrahim, S. Shawish, S. Aldroubi, A. Dawoud, and W. Abdin, “Airbag Protection and Alerting System for Elderly People,” Appl. Sci., vol. 13, no. 16, p. 9354, Aug. 2023.
L. Serioli, A. Ishimoto, A. Yamaguchi, K. Zór, A. Boisen, and E.-T. Hwu, “APELLA: Open-Source, miniaturized All-in-One powered Lab-on-a-Disc platform,” HardwareX, vol. 15, p. e00449, Sep. 2023.
E. Faliagka, V. Skarmintzos, C. Panagiotou, V. Syrimpeis, C. P. Antonopoulos, and N. Voros, “Leveraging Edge Computing ML Model Implementation and IoT Paradigm towards Reliable Postoperative Rehabilitation Monitoring,” Electronics, vol. 12, no. 16, p. 3375, Aug. 2023.
H. Zhu, Y. Peng, H. Xu, F. Tong, X.-Q. Jiang, and M. M. Mirza, “Secrecy Enhancement for SSK-Based Communications in Wireless Sensing Systems,” IEEE Sens. J., vol. 22, no. 18, pp. 18192–18201, Sep. 2022.
R. P. Siguas, E. M. Solis, and H. M. Solis, “Design of a Portable Electrocardiogram (ECG) for the Prevention of Cardiac Anomalies in Health Campaigns in Peru,” Int. J. Emerg. Technol. Adv. Eng., vol. 11, no. 10, pp. 131–136, Oct. 2021.
D. Saputra, F. L. Gaol, E. Abdurachman, D. I. Sensuse, and T. Matsuo, “Architectural Model and Modified Long Range Wide Area Network (LoRaWAN) for Boat Traffic Monitoring and Transport Detection Systems in Shallow Waters,” Emerg. Sci. J., vol. 7, no. 4, pp. 1188–1205, Jul. 2023.
S. Y. Ly, K. J. Choi, J. H. Kim, and K. Lee, “In Vivo Diagnostic Real-time Wireless Sensing of Glucose in Human Urine and Live Fish Deep Brain Cells,” Int. J. Sensors, Wirel. Commun. Control, vol. 12, no. 7, pp. 543–552, Sep. 2022.
R. Biswas, D. Saha, and S. Biswas, “Novel ethanol sensing via clad modified fiber with SnO2:CuO with wireless adaptability,” Appl. Nanosci., vol. 11, no. 10, pp. 2617–2623, Oct. 2021.
D. N. Gençoğlan, Ş. Çolak, and M. Palandöken, “Spiral-Resonator-Based Frequency Reconfigurable Antenna Design for Sub-6 GHz Applications,” Appl. Sci., vol. 13, no. 15, p. 8719, Jul. 2023.
Y. Xu, R. K. Amineh, Z. Dong, F. Li, K. Kirton, and M. Kohler, “Software Defined Radio-Based Wireless Sensing System,” Sensors, vol. 22, no. 17, p. 6455, Aug. 2022.
E. D. Widianto, G. N. Huda, and O. D. Nurhayati, “Portable spirometer using pressure-volume method with Bluetooth integration to Android smartphone,” Int. J. Electr. Comput. Eng., vol. 13, no. 4, p. 3977, Aug. 2023.
Y. Wang et al., “Magnetoresponsive Photonic Micromotors and Wireless Sensing Microdevices Based on Robust Magnetic Photonic Microspheres,” Ind. Eng. Chem. Res., vol. 60, no. 48, pp. 17575–17584, Dec. 2021.
J. H. Khor, M. Sidorov, M. T. Ong, and S. Y. Chua, “Public Blockchain-Based Data Integrity Verification for Low-Power IoT Devices,” IEEE Internet Things J., vol. 10, no. 14, pp. 13056–13064, Jul. 2023.
Y. Chen, C. Hua, and Z. Shen, “Circularly Polarized UHF RFID Tag Antenna for Wireless Sensing of Complex Permittivity of Liquids,” IEEE Sens. J., vol. 21, no. 23, pp. 26746–26754, Dec. 2021.
S. M. Yang et al., “Soft, wireless electronic dressing system for wound analysis and biophysical therapy,” Nano Today, vol. 47, p. 101685, Dec. 2022.
A. Chiovato, M. Demarzo, and P. Notargiacomo, “Evaluation of Mindfulness State for the Students Using a Wearable Measurement System,” J. Med. Biol. Eng., vol. 41, no. 5, pp. 690–703, Oct. 2021.
F. Mallahi, M. Mohamed, and Y. Shaker, “Integration of Solar Energy Supply on Smart Distribution Board Based on IoT System,” Designs, vol. 6, no. 6, p. 118, Nov. 2022.
M. Jeon et al., “Investigation on Beam Alignment of a Microstrip-Line Butler Matrix and an SIW Butler Matrix for 5G Beamforming Antennas through RF-to-RF Wireless Sensing and 64-QAM Tests,” Sensors, vol. 21, no. 20, p. 6830, Oct. 2021.
S. Aziz Butt, A. Khalid, and A. Ali, “A software development for medical with a multiple decision taking functionalities,” Adv. Eng. Softw., vol. 174, p. 103294, Dec. 2022.
K. Taghizad-Tavana, M. Ghanbari-Ghalehjoughi, N. Razzaghi-Asl, S. Nojavan, and A. Alizadeh, “An Overview of the Architecture of Home Energy Management System as Microgrids, Automation Systems, Communication Protocols, Security, and Cyber Challenges,” Sustainability, vol. 14, no. 23, p. 15938, Nov. 2022.
A. Pandey et al., “Design and Fabrication of a Novel Gripper Wheel based All-Terrain Differential-Driven Unmanned Landmine and Metal Detector Robot Vehicle,” Int. J. Veh. Struct. Syst., vol. 14, no. 4, Nov. 2022.
C. E. Castañeda et al., “Electronic locking devices based on microcontrollers and chaotic maps using Model-Matching Control,” Microprocess. Microsyst., vol. 86, p. 104338, Oct. 2021.
J. F. Navarro-Iribarne, D. Moreno-Salinas, and J. Sánchez-Moreno, “Low-Cost Portable System for Measurement and Representation of 3D Kinematic Parameters in Sport Monitoring: Discus Throwing as a Case Study,” Sensors, vol. 22, no. 23, p. 9408, Dec. 2022.
S. Sonkusale, “Sutures for the wireless sensing of deep wounds,” Nat. Biomed. Eng., vol. 5, no. 10, pp. 1113–1114, Oct. 2021.
Y. Kim and Y. Choi, “Smart Helmet-Based Proximity Warning System to Improve Occupational Safety on the Road Using Image Sensor and Artificial Intelligence,” Int. J. Environ. Res. Public Health, vol. 19, no. 23, p. 16312, Dec. 2022.
T. Kocevska, T. Javornik, A. Švigelj, and A. Hrovat, “Framework for the Machine Learning Based Wireless Sensing of the Electromagnetic Properties of Indoor Materials,” Electronics, vol. 10, no. 22, p. 2843, Nov. 2021.
B. Gunn, P. Alevras, J. A. Flint, H. Fu, S. J. Rothberg, and S. Theodossiades, “A self-tuned rotational vibration energy harvester for self-powered wireless sensing in powertrains,” Appl. Energy, vol. 302, p. 117479, Nov. 2021.
I. Mujahidin and A. Kitagawa, “CP Antenna with 2 × 4 Hybrid Coupler for Wireless Sensing and Hybrid RF Solar Energy Harvesting,” Sensors, vol. 21, no. 22, p. 7721, Nov. 2021.
S. Zhang et al., “Degradable and stretchable bio-based strain sensor for human motion detection,” J. Colloid Interface Sci., vol. 626, pp. 554–563, Nov. 2022.
H. Huan et al., “Real-Time Predictive Temperature Measurement in Oil Pipeline: Modeling and Implementation on Embedded Wireless Sensing Devices,” IEEE Trans. Ind. Electron., vol. 68, no. 12, pp. 12689–12697, Dec. 2021.
G. S. Nhivekar, S. R. Jagdale, S. B. Kamble, B. T. Jadhav, R. K. Kamat, and T. D. Dongale, “Versatile Three-in-One Single Beam Visible Colorimeter for Undergraduate Chemistry Laboratories,” J. Chem. Educ., vol. 99, no. 11, pp. 3765–3772, Nov. 2022.
H. M. E. Hussein, M. Rinaldi, M. Onabajo, and C. Cassella, “A chip-less and battery-less subharmonic tag for wireless sensing with parametrically enhanced sensitivity and dynamic range,” Sci. Rep., vol. 11, no. 1, p. 3782, Feb. 2021.
R. Hassani, M. Boumehraz, and M. Hamzi, “Implementation of wheelchair controller using mouth and tongue gesture,” Indones. J. Electr. Eng. Comput. Sci., vol. 24, no. 3, p. 1663, Dec. 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Noor Amer Hamzah
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
